use esp-homekit to esp8266

2020-04-29 约 845 字预计阅读 2 分钟次阅读

组件

步骤

下载这些库到 compnents，并重命名文件夹

1
2
3


1. git clone --recursive https://github.com/maximkulkin/esp-homekit homekit
2. git clone --recursive https://github.com/maximkulkin/esp-http-parser http-parser
3. git clone --recursive https://github.com/maximkulkin/esp-wolfssl wolfssl

修改makefile文件

1
2
3
4
5


PROJECT_NAME = esp8266-homekit-led
  
CFLAGS += -DHOMEKIT_SHORT_APPLE_UUIDS
  
include $(IDF_PATH)/make/project.mk

修改 main 文件下的 component.mk
1

COMPONENT_DEPENDS := homekit
把项目的 wifi.h.sample 移到 main 文件夹下，然后修改为 wifi.h，最后写入自己的 WiFi 的 SSID 和密码
1 2

#define WIFI_SSID "mywifi" #define WIFI_PASSWORD "mypassword"

修改led demo，详细见目录下的 led.c

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42


...
  
#include <homekit/homekit.h>
#include <homekit/characteristics.h>
...
      
homekit_accessory_t *accessories[] = {
    HOMEKIT_ACCESSORY(.id=1, .category=homekit_accessory_category_lightbulb, .services=(homekit_service_t*[]){
        HOMEKIT_SERVICE(ACCESSORY_INFORMATION, .characteristics=(homekit_characteristic_t*[]){
            HOMEKIT_CHARACTERISTIC(NAME, "Sample LED"),
            HOMEKIT_CHARACTERISTIC(MANUFACTURER, "PYHOME"),
            HOMEKIT_CHARACTERISTIC(SERIAL_NUMBER, "025A2BABF19D"),
            HOMEKIT_CHARACTERISTIC(MODEL, "MyLED"),
            HOMEKIT_CHARACTERISTIC(FIRMWARE_REVISION, "0.1"),
            HOMEKIT_CHARACTERISTIC(IDENTIFY, led_identify),
            NULL
        }),
        HOMEKIT_SERVICE(LIGHTBULB, .primary=true, .characteristics=(homekit_characteristic_t*[]){
            HOMEKIT_CHARACTERISTIC(NAME, "Sample LED"),
            HOMEKIT_CHARACTERISTIC(
                ON, false,
                .getter=led_on_get,
                .setter=led_on_set
            ),
            NULL
        }),
        NULL
    }),
    NULL
};
  
homekit_server_config_t config = {
    .accessories = accessories,
    .password = "111-11-111",
    .setupId="1SP0",
};
  
void on_wifi_ready() {
    homekit_server_init(&config);
}
  
...

注意，需要在 menuconfig 中使能 MDNS 和 IPV6

1
2
3
4
5


# mDNs
CONFIG_ENABLE_MDNS=y
  
# IPV6
CONFIG_LWIP_IPV6=y

声明

该项目参考 esp32-homekit-led 中的 makefile 和项目目录

Although already forbidden by the sources and subsequent licensing, it is not allowed to use or distribute this software for a commercial purpose.

HomeKit Accessory Protocol (HAP) is Apple’s proprietary protocol that enables third-party accessories in the home (e.g., lights, thermostats and door locks) and Apple products to communicate with each other. HAP supports two transports, IP and Bluetooth LE. The information provided in the HomeKit Accessory Protocol Specification (Non-Commercial Version) describes how to implement HAP in an accessory that you create for non-commercial use and that will not be distributed or sold.

The HomeKit Accessory Protocol Specification (Non-Commercial Version) can be downloaded from the HomeKit Apple Developer page.

Copyright © 2019 Apple Inc. All rights reserved.

esp-homekit is Apple HomeKit accessory server library, which can be used on esp8266 and esp32, the following is esp-homekit based on ESP8266_RTOS_SDK migration steps on esp8266.

Components

Steps

download these libraries to components and rename folder

1
2
3


1. git clone --recursive https://github.com/maximkulkin/esp-homekit homekit
2. git clone --recursive https://github.com/maximkulkin/esp-http-parser http-parser
3. git clone --recursive https://github.com/maximkulkin/esp-wolfssl wolfssl

modify the makefile

1
2
3
4
5


PROJECT_NAME = esp8266-homekit-led
  
CFLAGS += -DHOMEKIT_SHORT_APPLE_UUIDS
  
include $(IDF_PATH)/make/project.mk

modify the component.mk under main
1

COMPONENT_DEPENDS := homekit
move the project’s wifi.h.sample to main folder, then modify it to wifi.h, finally write your WiFi SSID and password
1 2

#define WIFI_SSID "mywifi" #define WIFI_PASSWORD "mypassword"

modify led demo, see the led.c for details

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42


...
  
#include <homekit/homekit.h>
#include <homekit/characteristics.h>
...
      
homekit_accessory_t *accessories[] = {
    HOMEKIT_ACCESSORY(.id=1, .category=homekit_accessory_category_lightbulb, .services=(homekit_service_t*[]){
        HOMEKIT_SERVICE(ACCESSORY_INFORMATION, .characteristics=(homekit_characteristic_t*[]){
            HOMEKIT_CHARACTERISTIC(NAME, "Sample LED"),
            HOMEKIT_CHARACTERISTIC(MANUFACTURER, "PYHOME"),
            HOMEKIT_CHARACTERISTIC(SERIAL_NUMBER, "025A2BABF19D"),
            HOMEKIT_CHARACTERISTIC(MODEL, "MyLED"),
            HOMEKIT_CHARACTERISTIC(FIRMWARE_REVISION, "0.1"),
            HOMEKIT_CHARACTERISTIC(IDENTIFY, led_identify),
            NULL
        }),
        HOMEKIT_SERVICE(LIGHTBULB, .primary=true, .characteristics=(homekit_characteristic_t*[]){
            HOMEKIT_CHARACTERISTIC(NAME, "Sample LED"),
            HOMEKIT_CHARACTERISTIC(
                ON, false,
                .getter=led_on_get,
                .setter=led_on_set
            ),
            NULL
        }),
        NULL
    }),
    NULL
};
  
homekit_server_config_t config = {
    .accessories = accessories,
    .password = "111-11-111",
    .setupId="1SP0",
};
  
void on_wifi_ready() {
    homekit_server_init(&config);
}
  
...

note! you need to enable MDNS and IPV6 in menuconfig

1
2
3
4
5


# mDNs
CONFIG_ENABLE_MDNS=y
  
# IPV6
CONFIG_LWIP_IPV6=y

Statement:

This project refers to the makefile and project directory from esp32-homekit-led

Although already forbidden by the sources and subsequent licensing, it is not allowed to use or distribute this software for a commercial purpose.

HomeKit Accessory Protocol (HAP) is Apple’s proprietary protocol that enables third-party accessories in the home (e.g., lights, thermostats and door locks) and Apple products to communicate with each other. HAP supports two transports, IP and Bluetooth LE. The information provided in the HomeKit Accessory Protocol Specification (Non-Commercial Version) describes how to implement HAP in an accessory that you create for non-commercial use and that will not be distributed or sold.